FC-54P Quick Start (P/N: 2900-300626QS REV 1)
P/N:
2 9 0 0 - 3 0 0 6 2 6 QS
Rev:
1
Scan for full manual
FC-54P Quick Start Guide
This guide helps you install and use your
FC-54P
for the first time.
www.kramerav.com/downloads/FC-54P
to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check w
hat’s in the box
FC-54P
Ethernet Gateway
4 Rubber feet
1 Bracket set
1 Power supply (5V DC)
1 Quick start guide
Step 2: Get to know your FC-54P
#
Feature
Function
1
IR IN Sensor and LED
Sensor for IR learning, LED lights during activity
2
LINK LED
Shows the Ethernet link is active
3
GPIO/RELAY 1/ 2 LED
pairs
Blue LED pair shows the activity status of port 1 and port 2:
When set as GPIO, the left LED of the pair indicates active IO-P1 and right LED indicates active IO-P2
When set as RELAY, the left LED of the pair indicates active Relay-P1 and right LED indicates active
Relay-P2
4
IR/RS-232 3/4 LED
pairs
Blue LED pair show the activity status of port 3 and port 4:
When set as RS-232, the left LED of the pair indicates Tx and right LED indicates Rx
When set as IR, the left LED of the pair indicates IR-P1 Tx and right LED indicates IR-P2 Tx
5
MODE DIP-switches
(Port 1 and Port 2)
Switch up (off) for GPIO, switch down (on) for Relay
The default setting is port 1 GPIO (up) and port 2 Relay (down)
6
MODE DIP-switches
(Port 3 and Port 4)
Switch up for RS-232, switch down for IR
The default setting is port 1 RS-232 (up) and port 2 IR (down)
7
ON LED
Lights green when the unit is on
