Kramer FC-42, Руководство пользователя

Страница: 11 / 21

8 FC-42 - Connecting the FC-42
5 Connecting the FC-42
Always switch off the power to each device before connecting it to your
FC-42 . After connecting your FC-42 , connect its power and then switch
on the power to each device.
To connect the FC-42 , as illustrated in the example in Figure 3 , do the following:
1. Connect a component video source (for example, an HDTV Satellite receiver
source) to the Y, P
B
, P
R
INPUT BNC connectors.
2. Connect the OUTPUTS:

Connect the SDI BNC connector to an HD-SDI acceptor (for example,
a non-linear editor)

Connect the SDI BNC connector to an HD-SDI acceptor (for example,
an HD-SDI display)

Connect the RGB/HV 15-pin HD computer graphics video connector to
an RGBHV acceptor (for example, a projector)
3. Connect a PC or other controller, if required (see Section
‎5.1
).
4. Connect the power cord (not shown in Figure 3 ).
i