Kramer FC-132ETH, Руководство пользователя

Страница: 12 / 61

Figure 2 defines the rear panel of the FC-132ETH .
Figure 2: FC-132ETH 33x9 Serial/Data Router Rear Panel
# Feature Function
1 SERIAL RS-232/RS-485 3-pin
Terminal Block
Connect to the device to be controlled serially, (for example, the VS-3232DN). When
set to RS-232, (see
RS-232 RS-485 Button ), this port can be used as input port
number 33
2 RS-232 RS-485 Button Release the button to set the port to RS-232 mode. Depress the button to set the port
to RS-485 mode
3 RS-485 TERM Switch Slide down to terminate the RS-485 bus. Slide up to leave the RS-485 bus
unterminated (see
Section
‎10.1
)
4 CONTROL RS-232 3-pin Terminal
Block
Connect to a serial controller (see Section
‎7.1
)
5 ETHERNET RJ-45 Connector Connect to a PC via a LAN (see Section
‎7.2
)
6 Mains Power Connector, Fuse and
Power Switch Plug in the power cord and switch the device on and off
7 RS-232 PORTS Outputs 1~32 3-pin
Terminal Blocks
Connect to up to 32 serial destination devices, (see Section
‎6
)
8 F/W UPG Mini USB Connector For the use of Kramer service personnel only (see Section
‎10.5
)
9 RS-232 DATA Serial Outputs a~h 3-
pin Terminal Blocks
Connect to up to eight serial source devices
8
FC
-1
3
2
E
T
H
–
De
fin
in
g
t
h
e
FC
-13
2E
T
H
33
x9
S
er
ial
/D
a
ta R
o
u
ter