KRAMER: SIMPLE CREATIVE TECHNOLOGY
Installing the F-010
6
5.2.1 Wiring the 13-pin Terminal Block Connector
The 13-pin terminal block is an easy plug-in connector for attaching the outputs.
Follow the colors of the color-coded sticker on these terminals for proper
connection of the cable.
Figure 2
defines the pinout for the terminal block.
Video
EDID
Power
GND
12V
Figure 2: Terminal Block Pinout
Note
:
•
Use the connector clips only when removing wires, not when inserting
them
•
Each wire should protrude 9mm (0.35") from the plastic insulation so
that it can be easily connected. Be sure to fully insert each wire to
prevent them from crossing
Figure 3
defines the corresponding VGA connector pinout:
6 - GND (Red)
1 - Red
2 - Green
3 - Blue
10 - GND (Sync)
13 - Hor
14 - Ver
12 - SDA
15 - SCL
7 - GND (Green)
8 - GND (Blue)
Figure 3: VGA Connector Pinout