KRAMER: SIMPLE CREATIVE TECHNOLOGY
Technical Specifications
10
6
Technical Specifications
Table 2
lists the technical specifications:
Table 2: Technical Specifications
1
INPUTS:
of the F-010
1 UXGA on a 15-pin HD (F) connector
1 Power 12V DC on a 2-pin terminal block connector
OUTPUTS:
1 RGBHV for XGA on an 8-pin terminal block connector
SDA and SCL for EDID on a 2-pin terminal block connector
MAX. OUTPUT LEVEL:
1.7Vpp
RESOLUTION:
Up to UXGA
BANDWIDTH (-3dB):
400MHz
DIFF. GAIN:
0.1%
DIFF. PHASE:
0.1 Deg
K-FACTOR:
<0.05%
S/N RATIO:
68.8dB @5MHz
CONTROLS:
XGA EQ.: 0dB to 8.2dB; power LED
COUPLING:
DC
POWER SOURCE:
12V DC 70mA
DIMENSIONS:
Closed: 7.5cm x 15.7cm x 4.4cm (2.95” x 6.18" x 1.73") W, D, H
Open: 7.5cm x 20.7cm x 4.4cm (2.95” x 8.15" x 1.73") W, D, H
WEIGHT:
0.19kg (0.42lbs) approx.
ACCESSORIES:
Power supply
OPTIONS:
Kramer C-GM/XL cable
2
1 Specifications are subject to change without notice
2 The Kramer C-GM/XL cable has a molded male 15-pin HD connector installed on one end, and the corresponding RGBHV
coaxes exposed, pre-stripped and tinned at the other end, as well as two additional wires to connect pins 12 and 15 for EDID
support. For details, see our Web site at
http://www.kramerelectronics.com
