![background image](http://html.mh-extra.com/html/kramer/dsp-1/dsp-1_user-manual_2002022023.webp)
Kramer Electronics Ltd.
DSP
‑
1
– Protocol 3000
21
Protocol 3000
The
DSP
‑
1
Digital Sound Processor
can be operated using the Kramer Protocol 3000 serial
commands. The command framing varies according to how you interface with the
DSP
‑
1.
Generally, a basic video input switching command that routes a layer 1 video signal to HDMI
out 1 from HDMI input 2 (
ROUTE 1,1,2
), is entered as follows:
•
Terminal communication software, such as Hercules:
The framing of the command varies according to the terminal communication software.
•
K-Touch Builder (Kramer software):
•
K-Config (Kramer configuration software):
All the examples provided in this section are based on using the K-Config software.
You can enter commands directly using terminal communication software (e.g., Hercules) by
connecting a PC to the serial or Ethernet port, depending on your device. To enter
CR
press
the Enter key (
LF
is also sent but is ignored by the command parser).
Commands sent from various non-Kramer controllers (e.g., Crestron) may require special
coding for some characters (such as,
/X##
)
. For more information, refer to your controller’s
documentation.