Step 4: Connect the inputs and outputs
Each
ASPEN-32UFX
port can be defined as an input or an output, enabling flexible configurations such as 1x31distribution
amplifiers, 31x1 routers or any other possible input-output combination. By default, the
ASPEN-32UFX
is set to operate as a 16x16
router: PORT 1 to PORT 16 as the inputs, and PORT 17 to PORT 32 as the outputs.
Always switch OFF the power on each device before connecting it to your
ASPEN-32UFX
.
Optionally, daisy-chain the
ASPEN-32UFX
by looping the genlock source to the next machine.
RJ-45 Pinout:
PIN EIA /TIA 568B
PIN
Wire Color
1
Orange / White
2
Orange
3
Green / White
4
Blue
5
Blue / White
6
Green
7
Brown / White
8
Brown
Step 5: Connect the power
Connect the 12V DC power supply to
ASPEN-32UFX
and plug it into the mains electricity. You can add a second power supply (not
supplied in the package) for backup.
Safety Instructions
Caution:
There are no operator serviceable parts inside the unit.
Warning:
Use only the Kramer Electronics power supply that is provided with the unit.
Warning:
Disconnect the power and unplug the unit from the wall before installing.
See
for updated safety information.
