Step 6: Control ASPEN-32UFX
Web Pages:
RS-232 and Ethernet:
RS-232
Protocol 3000
Baud Rate:
115,200
Stop Bits:
1
Data Bits:
8
Parity:
None
Command format example (define
port 1 as an input port):
#PORT-DIRECTION 1,IN
~01@PORT-DIRECTION 1,IN
TCP/IP Parameters
IP Address:
192.168.1.39
UDP Port #:
50000
Subnet mask:
255.255.0.000
Maximum UDP Connections:
20
Default gateway:
192.168.0.1
TCP Port #:
5000
Maximum TCP Connections:
Unlimited
Full Factory Reset
Web Page:
Device Settings Web page.
Protocol 3000:
Use
“Factory” command: #FACTORY<CR>
Rear panel
RESET button:
Press RESET for 5 seconds while the machine is on. The device
automatically resets and powers up again, loading factory default
values.
Authentication
User:
Admin
Password:
Admin
Configure the ports via the Video Switching Web page:
•
Define each port as an input or output by clicking a port number.
•
Toggle Mute (M) on each output.
•
Click a white button in the matrix to switch an input to an output.
= current input to output routing state
= optional input to output routing
