Kraissmann 370 SB 13/16, Руководство пользователя

Страница: 10 / 16

10 |
Українська
10 |
English
replaced when worn. Proceed as follows:
▶ Run the machine run in idle mode while slowly setting
the speed adjustor lever to the minimum speed.
▶ Switch the machine off, then pull the power plug.
▶ Set the speed adjustor lever to the maximum speed
setting to slacken the V-belt.
▶ Undo the screw to open the V-belt cover.
▶ Pry the V-belt off of the drive pulley by pulling up
the belt on one side and slowly turning the pulley.
The drive pulley comprises two disks that are pressed
together via a spring. If the V-belt does not exhibit
enough play to remove it, gently press the bottom half
of the drive pulley down to slacken the V-belt.
▶ Fit one end of the new V-belt to the variable pulley.
Fit the other end to the drive pulley by first sliding
it into the groove on one side of the pulley, then pry
-
ing the V-belt across the pulley into the groove on the
other side.
▶ Close the V-belt cover and screw down using the
screw.
DISPOSAL AND RECYCLING
The equipment is supplied in packaging to prevent it from
being damaged in transit. The raw materials in this packag
-
ing can be reused or recycled. The equipment and its acces -
sories are made of various types of material, such as metal
and plastic. Never place defective equipment in your
household refuse. The equipment should be taken to a
suitable collection center for proper disposal. If you do
not know the whereabouts of such a collection point, you
should ask in your local council offi ces.
KRAISSMANN Power Tools Ltd.
North Rhine-Westphalia, Dusseldorf,
Germany