44
45
СТИРАЛЬНАЯ МАШИНА АВТОМАТ
AUTOMATIC WASHING MACHINE
СТИРАЛЬНАЯ МАШИНА АВТОМАТ
AUTOMATIC WASHING MACHINE
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ • USER GUIDE
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ • USER GUIDE
Introduction to Other Functions
Power cut memory
• The washing machine has power cut memory functions. If the power is suddenly cut
off or the plug is loosened during washing, the machine can memorize the continuous
running condition and work on as per the original program after power restoration.
Eccentricity protection
• During the spin-drying, if the clothes are distributed uneven,the washing machine can
shake them loose and distribute again, and then conduct spindrying after the clothes
are distributed even;
• If the clothes are still not distributed even within the stipulated time,f or the purpose of
avoiding the strenuous vibration of the washing machine, the machine will downshift
for spin-drying, i.e. the spin-drying speed will be lowered;
• When there are fewer clothes, the eccentricity protection is likely to incur the machine
not to spin-dry. A part of clothes can be added properly to make them distribute evenly
and spin-dry;
• The washing machine distributes clothes and shakes them loose consequently
extending the time, which is a normal phenomenon.
NOTE
• The “standard cotton 60°C/40°C with max speed” programme are the standard
washing programs, and they are suitable to clean normally soiled cotton laundry
and that they are the most efficient programmes in terms of combined energy and
water consumptions for washing that type of cotton laundry, that the actual water t
emperature may differ from the declared cycle temperature.
• Make sure that no clothes is caught between the door and the seal. Please choose
suitable type of detergent for the various washing temperature to get the best washing
effect with less water and energy consumption.
13
Common Fault Analysis
*Whenthefollowingcircumstancestakeplace,theymaybearenotfaults
sometimes.Beforerepairing,pleasecheckandconfirmaccordingtothe
followinglist.Ifitisconfirmedfault,contactwiththeafter-salesservice
departmentofourcompany.Don
'
trepairbyyourself.Beforeinspection,
pleasepulloutthepowerplugandturnoffthetaptoensureyoursafety.
Common Fault Analysis and Solutions
There is some remaining
water in the machine
The washer does not run
This is normal and is the result of water tests
performed at the factory
Check if the power plug is inserted well.
Check if the tap is opened..
Check if the button “Start/Pause” is pressed.
Check if the delay feature is activated.
Check and fasten inlet hose.
Clean up drain hose and ask a specialized
person to repair it when necessary.
Check if the transit bolts has been removed.
Check if the adjustable legs are adjusted level.
Check if the washer is installed on the solid
and level floor.
Check if there are any barrettes or metal articles inside.
Select a proper procedure.
Add the proper detergent quantity according
to the instructions in detergent package.
After startup, if other functions need to be
selected, please press “Start/Pause”key first
and then operate.
Check if clothes in the drum is dispersive enough.
Check if the water is drain out or inflow well.
Check if the max height of the drain hose is lower
than 65cm
Check if the drain hose is immersed.
Water leakage
Abnormal noise and great
vibration
Washing efficiency is not
satisfied
The machine take no answer
after press buttons
Actually running time of
procedures is not
corresponded to the
display time
The washer fills while
draining
Common Fault Analysis and Solutions
