manualshive.com logo in svg

Kracht VC 0,025, Руководство по эксплуатации

Поделиться
Скачать
Kracht VC 0,025 Скачать руководство пользователя страница 55

7  Operation start-up

7.1  Preparation

 NOTICE

All work on the device may only be carried out by trained and professionally
qualified staff.
During all work, care must be taken that everything remains absolutely
clean.
The device has been designed for operation with fluids. Dry operation is not
permitted. The medium must guarantee a minimum lubrication.
Before starting the system make sure that a sufficient quantity of the oper-
ating medium is available so as to avoid dry operation.
Before starting the plant, the device must be filled with operating fluid to
prevent damage during dry operation.

 DANGER

Hazard caused by hazardous fluids

When operating the device with hazardous fluids, comply with the safety
datasheets and the regulations on handling these fluids.
Leaks of hazardous transport materials must be collected in such a manner
that no hazards arise for people and the environment.
Always comply with the existing national and international regulations ap-
plicable at the place of installation.

 CAUTION

Hazard caused by hot surfaces

The user is to take measures against unintended contact at temperatures
above 60°C.

●

Check the permissible operating data against the operating states to be
expected.

●

Check all fastening screws on the device.

●

Fill the device with operating fluid.

Gear type flow meter VC 0,025 ... VC 16

BVC0002EN-D0025420002_01     2010-07-05

55

Содержание VC 0,025



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды