manualshive.com logo in svg

Kracht VC 0,025, Руководство по эксплуатации

Поделиться
Скачать
Kracht VC 0,025 Скачать руководство пользователя страница 46

5  Transport and storage

5.1  Transport damage

Inspect the device for shipping damage as soon as the delivery has been
received.

If shipping damage is discovered, inform the shipping company.

If proper operation of the device is impaired by the damage, the device must
be replaced or repaired. In that case, contact the manufacturer.

5.2  Transport

 DANGER

Hazard caused by falling and tipping loads

During transport, accidents can occur due to the size and weight of the
device.
Compliance with applicable industrial safety requirements is mandatory.
Wear suitable protective clothing.
Use only suitable means of conveyance and lifting tackle with sufficient
load-bearing capacity.
Attach lifting tackle only to suitable points.
Attach the lifting tackle in such a manner that it cannot slip.
Secure the unit so that toppling over and falling down is impossible.
Always avoid jerks, impacts and strong vibrations during transportation.
Never walk under suspended loads.
Never work under suspended loads.

Gear type flow meter VC 0,025 ... VC 16

46

2010-07-05     BVC0002EN-D0025420002_01

Содержание VC 0,025



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды