●
Perform maintenance according to specification.
●
Replace defective and worn components.
●
If required, request spare parts lists and assembly drawings from the
manufacturer.
●
Document the type and scope of the maintenance work along with the
operating data.
●
Compare the operating data with the values of the first commissioning.
Determine the cause in case of major non-compliances (> 10 %).
●
Dispose of packing material and used parts in accordance with the local
stipulations.
Barriers and instructions
All barriers and warning signs removed during this must be attached to their
original position on completing maintenance and/or repairs.
9.3
Maintenance instructions
The following information provides recommendations on maintenance work
and maintenance intervals for the device being used.
Depending on the actually occurring loads in operation, the type, scope and
interval of the maintenance work can deviate from the recommendations. The
equipment builder/operator shall write an obligatory maintenance plan.
Within the framework of preventive maintenance, it is appropriate to replace
wear parts before reaching the wear limit.
With corresponding expertise and sufficient equipment, the replacement can
be carried out by the equipment builder/operator. Please consult the manu-
facturer about this.
Warranty
In case of improper implementation, any warranty is voided.
Gear pump BT / BTH
46
2021-02-05 88026290002-04
