7
KPS-TL10 • Digital earth resistance tester
2. SAFETY NOTES
- To avoid electrical shock, remove test leads before opening case.
- Do not exceed 200 V AC in 3 phase tester.
- Do not apply voltage across COM and OHM terminals.
WARNING
To avoid electrical shock or damage to the meter, do not get
water inside the case.
3. SPECIFICATIONS
Measurement system:
Earth Resistance by constant current
inverter.
820Hz,
2mA
approx.
Earth Voltage:
0-200 V AC, 40-500 Hz.
Earth Resistance:
Range and resolution
0-20
ohm
(0.01
ohm)
0-200
ohm
(0.1
ohm)
0-2000
ohm
(1
ohm)
Accuracy:
Earth v/- (1%rdg + 2dgt)
Earth resi/- (2%rdg +
2dgt) or +/- 0.1 Ω, which is grater
Safety standard:
IEC-1010 (EN 61010), installation
category
III
Low battery indication:
“B” symbol appears on the display.
Data hold indication:
“DH” symbol appears on the display.
Over range indication:
“1” (MSD).
Timer (auto power off):
About 3-6 minutes.
Display:
LCD 3 1⁄2 digit (2000 counts)
Power source:
(R6P) 1.5Vx6 pieces dry batteries.
Dimensions:
163 (L) x 100 (W) x 50 (D) mm.
Weight:
Approx. 800g. (battery included)
Accessories:
Test leads (red – 15M, yellow – 10M, green –
5M), Auxiliary Earth Bars Heavy Case,
Instruction
Manual.
