KPS KPS-MT60, Инструкция по эксплуатации

Страница: 35 / 40

35
KPS-MT60 • Digital multimeter
ENG
voltage, the display will simultaneously show the voltage polarity which is
connected with red test probe.
• Press FUNC key to switch AC voltage, DC voltage measurement.
4.11 Ω Measurement
• Resistance range of this meter: 660,0Ω, 6,600kΩ, 66,00kΩ, 660,0kΩ,
6,600MΩ, 66,00MΩ.
To measure resistance:
• Rotate rotary switch to
• Respectively connect black and red test probes to COM input socket and
VΩ input socket.
• Measure the resistance value of circuit to be tested with other two ends of
test probes.
• Read the measuring resistance value from LCD display.
4.12 Measurement
• When measuring resistance, press FUNC key to switch to continuity test.
• Respectively connect black and red test probes to COM input socket and Ω
input socket.
• Measure the resistance value of circuit to be tested with other two ends of
test probes
• During continuity test, if the measured circuit resistance is not greater than
about 50Ω, the buzzer may issue continuous sound.
4.13 Measurement
• When measuring continuity, press FUNC key to switch to diode test.
• Respectively connect black and red test probes to COM input socket and Ω
input socket.
• Measure two ends of diode to be measured with other two ends of test
probes
• The meter will display the forward voltage drop value of the diode.
4.14 Capacitance measurement