KPS KPS-MT60, Инструкция по эксплуатации

Страница: 21 / 40

21
KPS-MT60 • Digital multimeter
ENG
1. SAFETY INFORMATION
Warning
Please particularly note that inappropriate use may cause shock or damage
to the meter. When using, comply with common safety procedures and com-
pletely follow the safety measures stated in the operation manual. To make
full use of the meter’s functions and ensure safe operation, please carefully
read and follow the procedures and methods in the operation manual.
1.1 Preparation
When using the meter, the user should comply with standard safety rules:
- General shock protection
- Prevent misusing the meter
• Please check for damage that may have occurred during transportation after
receiving the meter.
• If it should be stored and shipped under hard conditions, please confirm if
the meter is damaged.
• Probe should be in good condition. Before use, please check whether the
probe insulation is damaged and whether metal wire is bare (not properly
insulated).
• Use the probe table provided with the meter to ensure safety. If necessary,
it should be replaced with another identical probe or one with the same ca-
pacity.
1.2 Usage
• When using, select the correct function and measuring range.
• Don’t exceed the indicated maximum of each measuring range.
• When measuring circuits with the meter connected, do not touch the probe
tip (metal part).
• When measuring, if the voltage to be measured is more than 60 V DC or
30 V AC (RMS), always keep your fingers always behind finger protection
device.
• Don’t measure voltage greater than 600 V.