KPC MGC500, Инструкция по эксплуатации и техническому обслуживанию

Страница: 18 / 39

17
2.2.4 Speed changing method
1. Please confirm the machine in stop state, and not change speed while
overloading or at the beveled level
2. Make sure the gear lever and sub-gear lever at its proper position
Suggestions:
1. About the different speed position of walking position, please refer
to the technical data
2. Turn the clutch forward to walking side slightly, if gear lever can
not move, then turn it again
2.2.5 Parking method
1. Turn the accelerating lever forward to LOW side, slow down the
machine
2. Turn the clutch lever forward to PARKING position, stop the machine
3. Turn the gear lever to N position
4. Turn the main swift to OFF position, stop the engine
5. Turn the fuel swift to OFF position
Suggestions:
When the engine working under low speed for a long time, the spark
plug can easily get carbon residue. Before stop it, please remove them
with high speed after run in low rotating for a long time.
WARNING

Forbid to park suddenly, it will easily cause machine turn over

Park the machine in flat area without any potential dangers

Forbid to park in beveled level, if necessary, fasten the wheels
WARNING

Stop the machine while changing the speed
。

Changing the speed with right way, if not, will easily lead to stall off