KPC MGC500, Инструкция по эксплуатации и техническому обслуживанию

Страница: 17 / 39

16
2.2.3 Driving method
1. Make sure the safe affairs around the machine
2. Make sure the clutch at the stop position
.
3. Turn the gear lever and sub-gear lever to the neutral position
Suggestions
：
About the walking speed of each gear lever, please refer to the
technical data.
Turn the clutch forward to walking side slightly, if gear lever cannot
move, then turn it again.
4. Turn the accelerating lever forward to HIGH position, this can speed
up the output rotary speed.
5. Turn the clutch to start position to start the machine.
1. Turning left, operate the left clutch handle
2. Turning right, operate the right clutch handle
WARNING

Do not get close to people around while driving

Make sure the safe affairs around, in order to keep the speed, please check
the road conditions and slope before driving the machine

To avoid any skidding, turning over. Forbid to moving forward suddenly,
accelerating suddenly and sharp turning suddenly at the beveled level

Please turn the sub-gear lever to the LOW position, low speed to
forward, or it will make driver injured, or make the machine skid or roll
over

Forbid to cross the road, it will cause skidding or turning over

Forbid to turnaround at the beveled level, it will easily cause machine
reverse, skidding, or turning over

When in condition of blurring view, narrow, bevel or up and down roads,
please obey indicator and prepare to restart once confirm the surrounding is
safe.

When driving, please do not turn the main swift to the OFF position