Kozy-World FBD3211R Скачать руководство пользователя страница 4

 

1. 

Do not place Propane/LP supply tank(s) inside any structure. Propane/LP supply tank(s) must be placed outdoors. 

 
2. 

This heater needs fresh air ventilation to run properly. This heater has an Oxygen Depletion Sensing (ODS) safety 
shut-off system. The ODS shuts down the heater if not enough fresh air is available. See 

Air for Combustion and 

Ventilation, 

pages 7 through 9. If heater keeps shutting off, see 

Troubleshooting

, pages 26 through 28. 

 
3. 

Keep all air openings in front and bottom of heater clear and free of debris. This will ensure enough air for proper 
combustion. 

 
4. 

If heater shuts off. Do not relight until you provide fresh, outside air. If heater keeps shutting off, have it serviced. 

 
5. 

Do not run heater: 

l

 

Where flammable liquids or vapors are used or stored. 

l

 

Under dusty conditions. 

 
6. 

Before using furniture polish, wax, carpet cleaner, or similar products, turn heater off. If heated, the vapors from 
these products may create a white powder residue within burner box or on adjacent walls or furniture. 

 
7. 

Always run heater with control knob at Pilot or ON locked positions. Never set control knob between locked 
positions. Poor combustion and higher levels of carbon monoxide may result. 

 
8. 

Do not use heater if any part has been under water. Immediately call a qualified service technician to inspect the 
room heater and to replace any part of the control system and any gas control which has been under water. 

 
9. 

Turn off and unplug heater and let cool before servicing. Only a qualified service person should service and repair 
heater. 

 
10.  Operating heater above elevations of 4,500 feet could cause pilot outage. 
 
11.  To prevent performance problems, do not use propane/LP fuel tank of less than 100 lb. capacity. 
 
12.  This heater should not be installed in a bedroom or bathroom. 
 
13.  Do not use this heater as a wood-burning heater. Use only the logs provided with the heater. 
 
14.  To prevent sooting, follow the instructions in 

Care and Maintenance

 (page 25). 

 
 
15.  Do not add extra logs or ornaments such as pine cones, vermiculite, or rock wool. Using these added items can 

cause sooting. Do not add lava rock around base. Rock and debris could fall into the control area of heater. After 
servicing, always replace screen before operating heater. 

 
16.  This heater is designed to be smokeless. If logs ever appear to smoke, turn off heater and call a qualified service 

person.  Note:  During  initial  operation,  slight  smoking  could  occur  due  to  log  curing  and  the  heater  burning 
manufacturing residues. 

 

 

QUALIFIED INSTALLING AGENCY 

Only  a  qualified  agency  should  perform  installation  and  replacement  of  gas  piping,  gas  utilization  equipment  or 
accessories,  and  repair  and  servicing  of  equipment.  The  term 

qualified  agency

  means  any  individual,  firm, 

corporation, or company that either in person or through a representative is engaged in and is responsible for:  

a)  Installing, testing, or replacing gas piping or 

b)  Connecting, installing, testing, repairing, or servicing equipment; that is experienced in such work; that is familiar 

with all precautions required; and that has complied with all the requirement of the authority having jurisdiction.  

 

 
 
 
 

Содержание FBD3211R
































Отзывы: