22
FIREPLACE SET UP
7.0 FIREPLACE SET UP
LATCH HANDLES
Figure 7.1, Safety Barrier Installation
7.1 Safety Barrier Installation
1. Locate the (4) slots located on each side of the fireplace
frame.
2. Align the notched tabs located on the back of the safety
screen front with the slots on the fireplace frame.
3. Raise the screen front slightly into slots and allow the tabs to
lower into position.
• To remove safety screen: lift the screen up and out of slots.
7.2 Glass Frame Assembly
WARNING: Do not operate this fireplace with the glass removed,
cracked, or broken. Replacement of the glass assembly, should
be done by a licensed or qualified service person.
7.2.1 Remove Glass Frame Assembly
WARNING: Do not remove the glass assembly when hot.
1. Remove the safety screen.
2. Locate (2) spring-loaded latches securing the glass assembly
at the bottom of the firebox.
3. Pull the spring-loaded latches out and down to release the
bottom of the glass assembly.
4. Lift glass assembly up and off of the (2) tabs located at the
top of the firebox.
7.2.2 Install Glass Frame Assembly
1. Align the slots on top of the glass assembly over the tabs at
the top of the firebox while lowering the bottom of the glass
assembly into position.
2. Pull the spring-loaded latches out and up to secure the
bottom of glass to the bottom of the fireplace.
3. Reinstall the safety screen.
Figure 7.2, Latch Handle Location