![background image](http://html1.mh-extra.com/html/twin-star-international/dfs-750-12/dfs-750-12_quick-start-manual_1184420001.webp)
Your fireplace consists of a fan forced wire
element type heater. The thermostat setting
range is always ON, 60°F - 82°F or 16°C -
27°C or 0°F (without heater function).
This button on the remote control only turns
ON and OFF heater function.
Press the TIMER button will cycle through the
10 timer settings (30 minutes, 1 Hour, 2H, 3H,
4H, 5H, 6H, 7H, 8H and 9H) and the OFF setting.
MODELS: DFS-750-12, DFS-750-13, DFS-750-14, DFS-750-15
- POWER
- HEATER
- TIMER
Made in China
Printed in China
© 2012,Twin-Star International,Inc.
Spinner
Motor
Assembly
Light bulb
3. Pinch this spring clip to
loosen. Gently turn and pull the
rubber grommet out of
the motor shaft.
REPLACING THE LIGHT BULB
VOLTAGE
120 VAC, 60 Hz
AMPS
12.5 Amps
WATTS (Max.)
1500 Watts
OPERATING INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
PRODUCT SPECIFICATIONS
The Power button supplies power to all of the
functions of the stove.
Each time the flame button is pressed, the
intensity of the flame decreases. There are 5
brightness levels you can cycle through.
- FLAME
For Customer Service:
www.twinstarhome.com
888-674-7517
8:30 a.m.-5:30 p.m., EST, Monday-Friday
Pull
Pull
Light bulb retaining spring
1. Loosen Phillips head screws
and remove back panel.
2. Remove back panel to access
light bulb
2. Pull away the bulb retaining
spring, unscrew the old bulb,
and replace with a new 40w
candelabra bulb.
1
3
2
Distributed by
Twin-Star International, Inc. Under license.
duraflame™ and the duraflame flame
logo are trademarks of Duraflame, Inc.
Twin-Star International, Inc.
Delray Beach, FL 33445
Made in China • Printed in China
MOUNTING THE LEGS
1. Align the 2 mounting tabs into the bracket (Fig 1)
2. Sliding the legs outward to lock in place (Fig 2)
3. Fasten the legs to the base using the included screws,1 per leg (Fig 3)
Leg
Bracket