Kowa SC200PK1C, Руководство по эксплуатации, Страница: 3 / 19

No. Name Function
(1)
Lens Mount (CS-Mount) Part where lens is connected to the camera. The camera
supports a wide variety of CS-mount lenses.
(2)
Flange Focus Adjuster Used to adjust the flange focus (the distance from the
lens mounted surface to the image area).
(3)
Flange Focus Fixing Screw Loosen this screw when maintain and adjusting the
camera flange focus. When the adjustment is finished,
retighten it.
(4)
Auto Iris Connector Used to connect an auto-iris lens. It supports only DC
iris lenses.
(5)
Tripod Screw Used to secure the camera to a tripod or the like. Use
only a 1/4-20UNC screw not longer than 5.5 mm.
(6)
Fixing Hole Used to keep the camera from rotating.
(7)
Setup Button ← Used to change settings ( ← ).
(8)
Setup button ↑ Used to select a setting item ( ↑ ).
(9)
Setup button ↓ Used to select a setting item ( ↓ ).
(10)
Setup button → Used to change settings ( → ).
(11)
Menu button Used to enter/exit the setup mode and determine/execute
settings.
(12)
RS-485/day and night
switching terminal Used to connect an RS-485 device to remotely switch
day and night modes.
(13)
RS-485 terminator switch When RS-485 communication is used, set the switch to
the ON position to make a one-to-one connection or to
the OFF position to make a daisy chain connection (to
the ON position for only the last connected camera).
(14)
12 VDC terminal Used to input 12 VDC power. Pay attention to the
polarities.
(15)
Power indicator A green LED stays illuminated when power is supplied
to the camera.
(16)
HD-SDI output terminal Used to output HD-SDI images.
(17)
SD output terminal Used to output analog SD VIDEO signals.
(18)
GENLOCK IN
Used to input external synchronizing signals. For
external synchronization, input VBS, BBS, and VS
signals.
(19)
GENLOCK IN TERM When external synchronization is used and a T
connector is used for looping, this must be set to OFF. In
normal cases, it must be set to ON.
(20)
RESET button Used to reset the camera to the state when the camera
power is turned on.