User’s Manual
NETIO-230A
www.koukaam.se
12
5.2
System configuration
In this section the user can change network and e-mail parameters, system time, administrate user
accounts or perform the firmware upgrade.
5.2.1
Network parameters
Click
Configuration
link in the menu to change the system configuration.
Insert network
IP Address, Subnet Mask, Default Gateway
(router address) and
DNS Server
regarding your network parameters. If you do not like to setup the network parameters manually, you
can Enable
DHCP
to automatically obtain requested parameters from the DHCP server in your
network.
Switch delay [x0.1s]
specifies delay between triggering two outputs. It avoids overloading of
the mains supply by turning the outputs ON one by one.
Device name
allows you to insert your own name or description of your NETIO-230A so you
can indentify your devices easily.
Firmware version
shows current firmware version.
After you make requested changes on this page and click
Apply
the device will change the
parameters and restart automatically. After the restart you will have to login again.
Reset to factory defaults
button restores factory default settings.