Koukaam KNR-5016 Скачать руководство пользователя страница 8

8

necessary codecs. The FFDShow codec can be downloaded for example from address 

5. Support

If the problems continue, contact your vendor, or directly contact the manufacturer's technical support department
of KOUKAAM a.s. company at the address 

. Before you do so, please check that your IPCorder

is equipped with the latest version of firmware (your problem is probably resolved in the new version). We also
recommend visiting FAQ at 

in the support section where the FAQs are fully answered.

We believe that you will be satisfied with our product. In case of queries or reminders concerning the functionality
of IPCorder, please contact us.

The KOUKAAM Team

The manufacturer bears no responsibility for any technical or printing errors and reserves the right to make any changes
in the product and in this User Manual without prior notice. Any such changes shall be announced via the product's
website 

The manufacturer does not provide warranties of any kind whatsoever with regard to any information given in this user
manual or any derived warranties regarding product saleability or its fitness for a specific use.

In particular, the manufacturer does not provide any warranties for defects caused by incorrect use of the product,
failure to abide by the instructions and recommendations given in the user manual and for any defects caused by
unprofessional activities of third parties outside the manufacturer's authorized service shop.

November 2012

© 2012 KOUKAAM a.s. All rights reserved.

Содержание KNR-5016









Отзывы: