Wh485ba04a-P2
●
Press the
to switch
from trip A to trip B.
Adjust button
●
Press and hold the
for
3 seconds to reset the trip A.
Adjust button
●
Press the
to switch from
trip B to total hour meter.
Adjust button
●
Press and hold the
for 3
seconds to reset the trip B.
Adjust button
●
Press the
to switch from
total hour meter to hour meter A.
Adjust button
●
Press the
to switch from
hour meter A to hour meter B.
Adjust button
●
Press the
to exit from
Hour Meter B and to go back to
odometer screen.
Adjust Button
●
Back to the odometer screen.
Switch function instructions
●
Instructions for adjust button
●
While on main screen, press the
once to switch the
function from odometer to trip A .
adjust button
●
While on odometer screen, press and
hold the
for 3
seconds to change the speed unit.
Adjust button
●
Instructions for select button
●
Back to clock screen.
3
If 24hour mode is chosen,
then the AM/PM symbol will not be
displayed.
●
Press the
while on main
screen to switch from Clock to
Stopwatch.
Select button
●
3 seconds to alternate 12/24hour
modes.
●
Press the
to switch from
Stopwatch to Volt meter.
●
seconds to reset the Stopwatch.
If the button setting is "ON",
then press the
to start
counting and press
again to stop.
Select button
Select button
If button setting is "OFF", then
press the external button (optional) to
start counting and press again
to stop.
When the option for manually
resetting the stopwatch is chosen,
press Select button and hold for 6sec.
to switch to Voltmeter.
●
Press the
to switch
from Voltage to Speed Record.
Select button
To switch from
Stopwatch to Speed Record, you
must have a record for the Stopwatch
(please do not reset the Stopwatch).
When Stopwatch is resetted, pressing
the Select/External button will start the
Stopwatch function again.
CAUTION
When Maintenance
Symbol is ON, please reset under
this function screen.
●
Press and hold the
for 3
seconds to reset the
Select button
Speed Record
●
Press the
to switch
from
o c
meter.
Select button
Speed record t
lock
Battery replacement
2-4
CR2032
2
●
●
The meter includes an internal battery (CR2032). This battery shall be
replaced only when power runs out.
1
Follow this procedure for proper installation.
In order to install the battery properly, push the battery as show on figure (A)
to make sure the battery is placed underneath the metal tab (1).
Not following this procedure could result in permanent
damage to the meter.
Figure A
PUSH
2-3
Display range DC 8~18 V
：
Display unit 0.1V
：
Setting unit 1
：
minute
Setting range 12 24 hours
：
、
Display range : 0~9999.9 km (mile)
○
Odometer
○
Trip meter A.B
●
Hour meter
Display range : 0~99,999 km (mile)
automatically resets after 99,999km (mile)
Display range : 0~360 km/h (0~225 MPH)
●
Speedometer
Display unit 1 km/h & MPH for alternative
：
Display range 0~9999.9 hour
：
,
automatically resets after 9999.9 hours
○
Hour meter A.B
Display unit 0.1 hour
：
<0.5 second
○
Display internal
automatically resets after 0~9999.9 km (mile)
Display unit : 1 km (mile)
Display unit : 0.1 km (mile)
Display range 0~99,999 hour
：
Display unit 0.1 hour
：
2
Design and specifications are subject to change without notice!
Function specifications
●
Inner Battery Level
Display range 4 levels
：
-10~+60 C
o
JIS D 0203 S2
●
Effective temperature range
●
Meter standard
●
Meter size
●
Meter weight
+/- 127g
120 X 40 X 23 mm
Display unit 0.01 sec.
：
Display range 0'00''00~9'59''99
：
Setting range 300~5,000 km
：
Average speed 0~360 km/h 0~225MPH
：
(
)
MAX Speed
0~360 km/h 0~225 MPH
：
(
)
MAX voltage
：
DC 8~18 V
Setting unit 1 km
：
automatically resets after 5,000 km
Odometer
Trip meter
Display range: 0~99,999 km mile ,
automatically resets after 99,999 km mile .
Display unit: 1 km mile .
Display range: 0~9999.9 km mile ,
automatically resets after 9999.9 km mile .
Display unit: 0.1 km mile .
●
●
●
●
(
)
(
)
(
)
(
)
(
)
(
)
2-2
Basic function instruction
Adjust Button
Press the Adjust button on the main screen to switch between ODO, TripA B,
Total Hour meter, Hour meter A B.
●
、
、
Select button
Press the Select button on the main screen to switch between
12 24 hour mode, speedometer record, stopwatch , and
MAX record.
●
、
Speedometer
Display range: 0~360km/h 0~225 MPH .
Display unit: km/h MPH).
●
●
(
)
(
●
Inner battery display range: 4 levels.
●
●
●
Clock: 12 24 MODE
Volt meter:
Stopwatch function:
can be either programmed for manual
activation or by wheel activation
MAX Record function
Average speed 0~360 km/h 0~225 MPH
MAX Speed
0~360 km/h 0~225 MPH
MAX voltage
●
：
：
(
)
：
(
)
：
、
DC 8~18 V
DC 8~18 V
Press and hold the
for
Select button
Select button
Press and hold the
for 3
Select button
WARNING!
