Sensor for Air Cylinder
JES
High-Power
Pull Stud Clamp
WPT
Performance
Curve
External
Dimensions
Installation
Method
Accessory
Sensor for Air Cylinder
Cautions
Model No.
Indication
Specifications
Features
Features
Model
WPT
For Various Applications: Pallet Transfer, Robotic Hand Gripper Change, etc.
Clamps with the Pull Bolt. Compact Body with Powerful Holding Force
High-Power Pull Stud Clamp
Connect the Pull Bolt with the Pull Stud Clamp
Compact, Light, yet Powerful
Powerful
Action Detection with Sensor
Fall Prevention with Self-Locking Spring
Application Examples
2
1
Exerts Powerful Clamping Force and
Holding Force with Mechanical Lock
Actions of the Pull Stud Clamp can be detected
by using with the Sensor for Air Cylinder.
Refer to P.12 for further information.
Self-locking spring enables to hold a workpiece
even when air is accidentally cut off.
※ Make sure to supply lock air for normal use.
Detached (Released) State
Connected (Locked) State
Release Air Pressure：ON
Lock Air Pressure：OFF
Release Air Pressure：ON
Lock Air Pressure：OFF
Release Air Pressure：OFF
Lock Air Pressure：ON
The pull bolt is pulled in by the piston and steel balls with
lock air + spring force to complete the locking operation.
Insert the pull bolt.
Provide release air pressure,
allowing for pulling in and out the pull bolt.
※ Simplified internal structure. Actual components are different.
Workpiece Setting (Before Connected)
Pallet, Workpiece, etc.
Pull Bolt
Self-Locking Spring
Accidental air cut off !
Air drops to 0MPa.
Safe
Pallet/Workpiece/Application Transfer. Allows for more compact hand.
Pallet Setup by Using with Locating Pin
Stocker for Robotic Hands
Gripper Change for Robotic Hands
Pull Bolt
Pull Stud Clamp
Pull Stud
Clamp
Seating
Surface
2 larger sizes added to the lineup!
(August, 2019)
Light
Max. Holding Force
Weight
WPT0500： 55g
WPT0600：95g
WPT0800：155g
WPT1000：215g
WPT0500： 768N
WPT0600：1234N
WPT0800：1918N
WPT1000：2436N
