Koryo KSJ 1501, Инструкция по эксплуатации

Страница: 10 / 16

10
PARTS AND FEATURES ASSEMBLY
Placing Juice Cup and Pulp Cup
1. Put the Juice Cup in the corresponding groove on
the main body and have its opening align with the
bottom of the juice outlet of the juicing body.
2. Put the Pulp Cup below the pulp outlet of the
juicing body and have it close to the juice cup.
Placing Small Food Tray and Pusher
1. Install the tray on the upper end of the Feeder Tube.
The tray can make feeding of food ingredients
more convenient, particularly when small-particle
food ingredients like grapes and strawberries are
processed.
2. Use the pusher to help with food processing and
juicing (it helps pushing the ingredients closer to
the spiral pusher).
USING YOUR JUICER/PROCESSOR:
Do not leave the appliance switched on continuously for more than 10 minutes. After 10 minutes,
switch off the appliance and allow it to cool down for 20-30 minutes before switching it on again.
The appliance will stop automatically after 20 minutes of continuous operation. Allow the appliance
to cool down for 20-30 minutes before switching it on again.
IMPORTANT:
When processing hard foods, the motor will lock. The appliance will tick and
the motor will pause for 2 seconds. Then it will work in reverse for 5 seconds (to release food
that is stuck) before coming to a stop. In this case, the appliance can begin to run again after
the switch is moved to the “0” position.
When the motor locks, stops and cannot automatically reverse, switch off the power switch
and put it on the “0” position. Press the “R” (Reverse) button of the power switch to discharge
the food ingredients in the appliance and finally press the “ON” button of the power switch
for normal use of the appliance. If the motor is still locked, it is suggested to remove the food
ingredients in the Spiral Pusher before continuing to use the appliance.
USAGE-JUICING