15
SERVICING
CABLE TYPES AND SECTIONS
FIG. 16
ATTENTION!!!
If the power supply cable is replaced, the installer should leave the ground wire longer than the
phase conductors (fig. 16) and comply with the recommendations given in paragraph 8.
TYPE OF
HOT PLATE
TYPE OF
CABLE
SINGLE - PHASE
POWER SUPPLY
Mixed hot plate with 1 heating
element “hi-light”
H05 RR - F / H07 RN-F
Section 3 x 1 mm
2
Denominations
W
ECelectric cooking*
(Wh/Kg)
Heating element hi-light Ø 18,0*12,0 cm
1800 / 750
188,8
POWER RATINGS OF THE ELECTRICAL COMPONENTS
In case of failure or cut in the cable, please move away
from the cable and do not touch it. Moreover the device
must be unplugged and not switched on. Call the
nearest authorized service center to fix the problem.
WARNING: MAINTENANCE MUST ONLY BE
PERFORMED BY AUTHORISED PERSONS.