Kortel Design Krisis Karre 100, Руководство пользователя

Страница: 6 / 36

6
Krisis KARRE - User’s manual
INNER CONTAINER & INSTALLATION
OF THE RESERVE IN THE HARNESS
Depending on the intended use, two different inner containers are available for the
KRISIS KARRE
:
• Standard flat container for harnesses with integrated container compartment
• Inner container for external containers and front containers
Both containers are designed as pocket containers with separate compartments for the lines and
the canopy, so that the canopy is released only after the lines have been stretched. This ensures a
controlled opening of the canopy and reduces the risk of the reserve becoming entangled in the
glider, especially when deploying in SAT-like rotations.
Inside the
KORTEL DESIGN
pocket container, the canopy is protected from dirt in the best possible
way, and unintentional release of the line bundles is reliably excluded.
In addition,
KORTEL DESIGN
inner containers are equipped with fabric-protected rubbers diameter
3 mm, which can be easily replaced as they age. Closure rubbers without protection have often led
to accidental deployments in the past.
Constructional features of KORTEL DESIGN inner containers
S = Red
KARRE 100 M = Blue
KARRE 125 L = Black
KARRE 160
XL = Orange
KARRE 220
The deployment tests have shown that pulling out the first third of the container requires the most
energy, as the inner container often gets caught in the container compartment during this first
phase of the deployment. The very flat and in the front area conical shape with a small cross-section
of the
KORTEL DESIGN
standard flat container counters this danger in the best possible way. The
tests prove that the flat container can be pulled out of the reserve compartment in the harness
much better and with less effort than a cube-shaped container - even if the latter has a significantly
smaller volume.
Thanks to its centered, triangular pull tab, the
KORTEL DESIGN
flat container will slide out of the
harness even if the deployment handle is intuitively pulled upward instead of outward.
The alternative
KORTEL DESIGN
front inner container has the conventional round shape, which is
ideal for front outer containers.
S = Red
KARRE 100 M = Blue
KARRE 125 L = Black
KARRE 160
A detailed description for repacking from the standard flat container to the front inner container is
available on
KORTEL DESIGN
’s website.