
The reserve parachute should be installed in the container as
follows :
1 Connect the handle to the reserve parachute, using a lark’s
head.
2 Connect the reserve risers to the parachute using a suitable
connection (see page 17).
Connection handle - reserve
Reserve container
Reserve handle
Reserve risers
Closing flaps
Connection clips
Reserve parachute
49
1
2
3
4
5
6
3
3 Place the reserve and the rest of the risers, in the container.
Place the reserve so that the connection with the handle is
below the plate and as close as possible to the location of said
handle (see drawing). (Step 1)
4 Closer the container using the metal eyelets (Step 2)
5 Lock the container using the snap rings on the reserve
handle (Step 3)
Step 1
Koncept
Only use an emergency handle suitable for this harness. BE
Only use an emergency handle suitable for this harness. BE
CAREFUL of the total length between the handle and the
CAREFUL of the total length between the handle and the
container. It must not exceed 40cm. If in doubt, contact us
container. It must not exceed 40cm. If in doubt, contact us
7
1
7
4
7
2
5
Step 2
Step 3
Preparing your harness
Installation of the reserve parachute
Содержание KONCEPT
Страница 34: ...Bons Vols...
Страница 67: ...Have a nice flight...
Страница 100: ...Wir w nschen dir einen guten Flug...
Страница 101: ......