Kortel Design KONCEPT, Руководство пользователя, Страница: 46 / 101

Speedbar installation :
To install the speedbar, simply pass the cord through the
pulleys located on the side of the harness, then insert it into
the ring placed at the front of the seat.
The adjustment of the speedbar is done at the level of the
adjustment pads located on it.
The optimal setting allows you to take advantage of the entire
range available on the wing, when the second rung is pushed
out with your legs outstretched.
Speedbar pulleys
Speedbar passage rings
Speedbar cords
Adjustment pads
Speedbar
The speedbar should not be set too short. The wing must not be in
The speedbar should not be set too short. The wing must not be in
the accelerated position without voluntary action of the pilot on the accelerated position without voluntary action of the pilot on
the speedbar. the speedbar.
4
46
1
2
3
4
5
Koncept
3
1
2
Preparing your harness
Accessoires