Kortel Design KOLIBRI EVO, Руководство пользователя

Страница: 41 / 95

Carabiners :
The harness is fitted by default with flexible T-Bone links
connectors. Light and ultra-resistant (>2400DaN), they are
perfect for mountain use. To handle them, simply proceed as
described below (Steps 1 to 4).
It is also possible to use light aluminum carabiners.
41
KOLIBRI EVO
Step 1
Step 2
Step 3
Step 4
Cocoon adjustment:
(if equipped)
A well-adjusted cocoon keeps your legs straight during the
flight, without effort. Too short a setting forces the pilot to
force the cocoon taut, and too long a setting prevents
comfortable support. In both cases, the pilot expends
unnecessary energy to keep the legs straight.
The blue straps allow you to adjust the length of the upper
and lower parts independently, according to your preferences.
In order to obtain an optimal cocoon adjustment, several flights In order to obtain an optimal cocoon adjustment, several flights
may be necessary to refine the length of the different straps. The
may be necessary to refine the length of the different straps. The
pilot's posture and posture may differ between the gantry and the
pilot's posture and posture may differ between the gantry and the
actual situation in the air. actual situation in the air.
First settings
More detailed information is available at
More detailed information is available at www.korteldesign.com www.korteldesign.com
After each manipulation of a carabiner, it is imperative to check that it After each manipulation of a carabiner, it is imperative to check that it
is properly locked. If in doubt, repeat the operation.
is properly locked. If in doubt, repeat the operation.
We recommend the use of connectors with a resistance greater than We recommend the use of connectors with a resistance greater than
or equal to 2400daN. or equal to 2400daN.
Flexible connectors should not be used on straps wider than 25mm.
Flexible connectors should not be used on straps wider than 25mm.
According to the current state of knowledge on automatic Zicral
According to the current state of knowledge on automatic Zicral
carabiners, it is recommended to change them every 5 years or carabiners, it is recommended to change them every 5 years or
after 500 hours of use.
after 500 hours of use.
Preparing your harness