background image

Hook

-up
/Back panel

Analog C

ontr

ols

Digital C

ontr

ols

2

Important Safety Instructions

The lightning flash with arrowhead symbol, with-

in an equilateral triangle, is intended to alert the 

user to the presence of uninsulated “dangerous 

voltage” within the product’s enclosure that may 

be of sufficient magnitude to constitute a risk of 

electric shock to persons. The exclamation point 

within an equilateral triangle is intended to alert 

the user to the presence of important operating 

and  maintenance instructions in the literature 

accompanying the device.

1.  Read and keep these instructions.

2.  Heed all warnings.
3.  Follow all instructions.

4. WARNING:

 To reduce the risk of fire 

or electric shock, do not expose this 
apparatus to rain or moisture.

5.  Do not use this apparatus near water.
6.  Do not block any ventilation openings. 

Install in accordance with the 
manufacturer’s instructions.

7.  Do not install near any heat sources such 

as radiators, heat registers, stoves, or other 
apparatus.

8.  Do not defeat the safety purpose of 

the polarized or grounding type plug. A 
polarized plug has two blades with one 
wider than the other. A grounding type 
plug has two blades and a third grounding 

FCC Compliance

Supplier’s Declaration of  
Conformity (for USA)
Responsible Party:  

KORG USA INC

Address: 

 

316 S. SERVICE RD. MELVILLE, NY

Telephone: 

1+ 631-390-6500

Equipment Type:

  

HYBRID ANALOG/DIGITAL MIXER

Model: 

 

MW-2408 / MW-1608 

This device complies with part 15 of the 

FCC Rules. Operation is subject to the fol-

This product complies with IEC62368-1 safety 
standards. Safety indication label is located on 
the bottom panel of the unit.

prong. The 
wide blade or 
the third prong 
are provided 
for your safety. 
If the provided 
plug does not 
fit into your 
outlet, consult 

an electrician for replacement of the 
obsolete outlet.

9.  Protect the power cord from being 

walked on or pinched particularly at 
plugs, convenience receptacles, and the 
point where they exit from the apparatus.

10. 

Use only with the cart, stand, 

tripod, bracket, or table 

specified by the manu-

facturer, or sold with 

the apparatus. When a cart 

is used, use caution when moving the 
cart/apparatus combination to avoid 
injury from tip-over.

11.  Unplug this apparatus during lightning 

storms or when the apparatus has been 
damaged in any way, such as power-
supply cord or plug is damaged, liquid 
has been spilled or objects have fallen 
into the apparatus, the apparatus has 
been exposed to rain or moisture, 
does not operate normally, or has been 
dropped.

12. WARNING: 

The apparatus must be 

connected to an AC power output 
(MAINS) with a protective grounding 
(earthing) connection. 

13.  Where a main AC connection (MAINS) 

or appliance coupler, such as power strip 
is used as the disconnect device, the 
disconnect device shall remain readily 
operable.

14.  Only use attachments/accessories 

specified by the manufacturer.

15.  Clean only with dry cloth.

16.  This product must be disposed of 

correctly. 

      This symbol indicates that 

this product must not be 
disposed of with household 
waste, according to the 
WEEE Directive (2012/19/
EU) and/or your national or 
regional law. This product 

should be taken to a collection center 
licensed for the recycling of electronic 
waste and electronic equipment (EEE). 
The mishandling of this type of waste 
could have a possible negative impact on 
the environment and human health due 
to potentially hazardous substances that 
are generally associated with EEE. At the 
same time, your cooperation in the 
correct disposal of this product will 
contribute to the efficient use of natural 
resources.  For more information 
concerning EEE recycling, contact your 
local city office or your household waste 
collection service.

lowing two conditions: 1)This device may not 
cause harmful interference;  
2) This device must accept any interference 
received, including interference that may cause 
undesired operation.

Note: This equipment has been tested and 

found to comply with the limits for a Class B 
digital device, pursuant to part 15 of the FCC 
Rules. These limits are designed to provide 
reasonable protection against harmful inter-
ference in both a commercial and residential 
installation. 

This equipment generates, uses and can 

radiate radio frequency energy and, if not 
installed and used in accordance with the 
instructions, may cause harmful interference to 
radio communications. 

However, there is no guarantee that interfer-

ence will not occur in a particular installation. 
If this equipment does cause harmful interfer-
ence to radio or television reception,which can 
be determined by turning the equipment off 
and on, the user is encouraged to try to correct 
the interference by one or more of the follow-
ing measures:

1.  Reorient or relocate the receiving 

antenna.

2.  Increase the separation between the 

equipment and receiver.

3.  Connect the equipment into an outlet on 

a circuit different from that to which the 
receiver is connected.

4.  When connecting this mixer to another 

product use only quality shielded cables.

5.  Use AC power outlets (MAINS) that 

are on a different branch circuit (circuit 
breaker or fuse), or employ a power filter/
conditioner.

6.  Consult the dealer or an experienced 

radio/TV technician for help.

7.  Unauthorized changes or modification to 

this system can void the user’s authority 
to operate this equipment.

Содержание SoundLink MW-1608


































































Отзывы: