Korg MICRO X Скачать руководство пользователя страница 189

Страница: 189 / 194

182

2.RECOGNIZED RECEIVE DATA

2-1 CHANNEL MESSAGES [H] :Hex, [D] :Decimal

+------+--------+--------------------+-------------------------------------------------------------+----+

|[Hex] |[H] [D] | [H] [D] | | |

+------+--------+--------------------+-------------------------------------------------------------+----+

| 9n | kk (kk)| 00 (00) | Note Off | A |

| Bn | 00 (00)| mm (mm) | Bank Select(MSB) ( for Prog/Combi change ) *1| PB |

| Bn | 01 (01)| vv (vv) | Modulation1 ( as microX:JY / X50:MOD.Wheel) | C |

| Bn | 02 (02)| vv (vv) | Modulation2 ( as microX:JoyStick-Y / X50:AMS) | C |

| Bn | 04 (04)| vv (vv) | Foot Pedal ( as AMS & FX Dmod Src =Pedal ) | C |

| Bn | 05 (05)| vv (vv) | Portamento Time | C |

| Bn | 06 (06)| vv (vv) | Data Entry (MSB) ( for RPC edit ) | C |

| Bn | 07 (07)| vv (vv) | Volume | C |

| Bn | 08 (08)| vv (vv) | Balance Control ( for Post IFX Panpot control ) *2| C |

| Bn | 0A (10)| vv (vv) | Panpot | C |

| Bn | 0B (11)| vv (vv) | Expression | C |

| Bn | 0C (12)| vv (vv) | Effect Control 1 ( as FX Dmod Src = FX1 ) | C |

| Bn | 0D (13)| vv (vv) | Effect Control 2 ( as FX Dmod Src = FX2 ) | C |

| Bn | 10 (16)| vv (vv) | Multi Purpose Ctrl1 ( as AMS & FX Dmod Src =Ribbon ) | C |

| Bn | 11 (17)| vv (vv) | Multi Purpose Ctrl2 ( as AMS & FX Dmod Src =KnobM1 ) | C |

| Bn | 12 (18)| vv (vv) | Multi Purpose Ctrl3 ( as AMS & FX Dmod Src =Slider ) | C |

| Bn | 13 (19)| vv (vv) | Multi Purpose Ctrl4 ( as AMS & FX Dmod Src =KnobM2 ) | C |

| Bn | 14 (20)| vv (vv) | ( as AMS & FX Dmod Src =KnobM3 ) | C |

| Bn | 15 (21)| vv (vv) | ( as AMS & FX Dmod Src =KnobM4 ) | C |

| Bn | 20 (32)| bb (bb) | Bank Select(LSB) ( for Prog / Combi change ) *1| PB |

| Bn | 26 (38)| vv (vv) | Data Entry (LSB) ( for RPC edit ) | C |

| Bn | 40 (64)| vv (vv) | Hold1 ( as Damper) | C |

| Bn | 41 (65)|<=3F/>=40(<=63/>=64)| Portamento Off/On | C |

| Bn | 42 (66)|<=3F/>=40(<=63/>=64)| Sostenuto Off/On | C |

| Bn | 43 (67)| vv (vv) | Soft Pedal | C |

| Bn | 46 (70)| vv (vv) | Sound Controller 1 ( for Sustain Level control ) | C |

| Bn | 47 (71)| vv (vv) | Sound Controller 2 ( for Resonance/HPF Cutoff ctrl) | C |

| Bn | 48 (72)| vv (vv) | Sound Controller 3 ( for Release Time control ) | C |

| Bn | 49 (73)| vv (vv) | Sound Controller 4 ( for Attack Time control ) | C |

| Bn | 4A (74)| vv (vv) | Sound Controller 5 ( for LPF Cutoff control ) | C |

| Bn | 4B (75)| vv (vv) | Sound Controller 6 ( for Decay Time control ) | C |

| Bn | 4C (76)| vv (vv) | Sound Controller 7 ( for LFO1 Speed control ) | C |

| Bn | 4D (77)| vv (vv) | Sound Controller 8 ( for LFO1 Pitch Depth control ) | C |

| Bn | 4E (78)| vv (vv) | Sound Controller 9 ( for LFO1 Delay control ) | C |

| Bn | 4F (79)| vv (vv) | Sound Controller 10 ( for Filter EG Intensity ctrl ) | C |

| Bn | 50 (80)| vv (vv) | Multi Purpose Ctrl5 ( as AMS & FX Dmod Src =SW 1 ) | C |

| Bn | 51 (81)| vv (vv) | Multi Purpose Ctrl6 ( as AMS & FX Dmod Src =SW 2 ) | C |

| Bn | 52 (82)| vv (vv) | Multi Purpose Ctrl7 ( as AMS & FX Dmod Src =Foot SW ) | C |

| Bn | 53 (83)| vv (vv) | Multi Purpose Ctrl8 ( as AMS & FX Dmod Src =CC#83) | C |

| Bn | 5B (91)| vv (vv) | Effect 1 Depth ( for Send 2 Level control ) | C |

| Bg | 5C (92)| 00/!=00 (00/!=000)| Effect 2 Depth ( for Insert FX Off/On ) | C |

| Bn | 5D (93)| vv (vv) | Effect 3 Depth ( for Send 1 Level control ) | C |

| Bg | 5E (94)| 00/!=00 (00/!=000)| Effect 4 Depth ( for Master FX1 Off/On ) | C |

| Bg | 5F (95)| 00/!=00 (00/!=000)| Effect 5 Depth ( for Master FX2 Off/On ) | C |

| Bn | 60 (96)| 00 (00) | Data Increment ( for RPC edit ) | C |

| Bn | 61 (97)| 00 (00) | Data Decrement ( for RPC edit ) | C |

| Bn | 62 (98)| ss (ss) | NRPN Param No.(LSB) ( for NRPN select ) *3| C |

| Bn | 63 (99)| tt (tt) | NRPN Param No.(MSB) ( for NRPN select ) *3| C |

| Bn | 64(100)| 0r (0r) | RPN Param No. (LSB) ( for RPN select ) *4| C |

| Bn | 65(101)| 00 (00) | RPN Param No. (MSB) ( for RPN select ) *4| C |

| Bn | 78(120)| 00 (00) | All Sound Off | C |

| Bn | 79(121)| 00 (00) | Reset All Controllers | C |

| Bn | 7A(122)| 00/7F (00/127) | Local Control Off/On | A |

| Bn | 7B(123)| 00 (00) | All Notes Off | A |

| Bn | 7C(124)| 00 (00) | Omni Mode Off ( as All Notes Off ) | A |

| Bn | 7D(125)| 00 (00) | Omni Mode On ( as All Notes Off ) | A |

| Bn | 7E(126)| 00 - 10 (00 - 16) | Mono Mode On ( as All Notes Off ) | A |

| Bn | 7F(127)| 00 (00) | Poly mode On ( as All Notes Off ) | A |

| Cn | pp (pp)| -- -- | Program Change ( for Prog/Combi change ) *1| P |

| Dn | vv (vv)| -- -- | Channel Pressure ( as After Touch ) | T |

+------+--------+--------------------+-------------------------------------------------------------+----+

AMS : Alternate Modulation Source

FX Dmod Src: Effect Dynamic Modulation Source

n : MIDI Channel No. (0 - 15) ...... Usually Global Channel.

When in Combination/Multi mode, each timbre's/track's channel.(Status is INT or BTH)

g : Always Global Channel No. (0 - 15)

x : Random

ENA : Same as Transmitted data

*1 : When Bank Map in Global mode is KORG;

MIDI In [Hex] Program Combination

mm,bb,pp = 00,00, 00 - 7F : Bank A 000 - 127 : Bank A 000 - 127

00,01, 00 - 7F : B 000 - 127 : B 000 - 127

00,02, 00 - 7F : C 000 - 127 : C 000 - 127

00,03, 00 - 7F : D 000 - 127

00,04, 00 - 7F : E 000 - 127 (Enabled at microX)

79,00, 00 - 7F : G 001 - 128

78,00, 00 - 7F : g(d) 001 - 128

38,00, 00 - 7F : G 001 - 128

3E,00, 00 - 7F : g(d) 001 - 128

When Bank Map in Global mode is GM(2);

MIDI In [Hex] Program Combination

mm,bb,pp = 3F,00, 00 - 7F : Bank A 000 - 127 : Bank A 000 - 127

3F,01, 00 - 7F : B 000 - 127 : B 000 - 127

3F,02, 00 - 7F : C 000 - 127 : C 000 - 127

3F,03, 00 - 7F : D 000 - 127

3F,04, 00 - 7F : E 000 - 127 (Enabled at microX)

79,00, 00 - 7F : G 001 - 128

78,00, 00 - 7F : g(d) 001 - 128

00,00, 00 - 7F : G 001 - 128

38,00, 00 - 7F : G 001 - 128

3E,00, 00 - 7F : g(d) 001 - 128

3F,7F, 00 - 7F : Mute (KORG MUTE)

(XG) 00,01 - : Assign correspond program in G

(GS) 01,00 - : Assign correspond program in G

*2 : n : When in Program mode, Global channel

When in Combination/Multi mode, each IFX's channel.

*3 : tt,ss = 00,02 : Arpeggiator Off/On

= 00,0A : Arpeggiator Gate control

= 00,0B : Arpeggiator Velocity control

= 00,0C : Arpeggiator Length control

When in Program/Combination mode, Global channel message is valid.

When in Multi mode, Control Track's channel message is valid.

Data Entry LSB value has no effect.

tt,ss = 01,08 : Vibrato Rate

tt,ss = 01,09 : Vibrato Depth

tt,ss = 01,0A : Vibrato Delay

tt,ss = 01,20 : Filter Cutoff

tt,ss = 01,21 : Filter Resonance

tt,ss = 01,63 : EG Attack Time

tt,ss = 01,64 : EG Decay Time

tt,ss = 01,66 : EG Release Time

tt,ss = 14,kk : Drum Filter Cutoff *

tt,ss = 15,kk : Drum Filter Resonance *

tt,ss = 16,kk : Drum EG Attack Time *

tt,ss = 17,kk : Drum EG Decay Time *

tt,ss = 18,kk : Drum Coarse Tune *

tt,ss = 19,kk : Drum Fine Tune *

tt,ss = 1A,kk : Drum Volume *

tt,ss = 1C,kk : Drum Panpot *

tt,ss = 1D,kk : Drum Rev Send(Send2) *

tt,ss = 1E,kk : Drum Cho Send(Send1) *

* Only valid when Part Mode is Drum, MDrm1 - MDrm4.

kk: Drum Inst No. (0C - 6C = C0 - C8)

Data Entry LSB value has no effect.

*4 : r = 0 : Pitch Bend Sensitivity ( Bend Range )

= 1 : Fine Tune ( Detune )

= 2 : Coarse Tune ( Transpose )

For drum program, both of Fine Tune and Coarse Tune affect to Detune.

Data Entry LSB value has no effect for Pitch Bend Sensitivity and Coarse Tune.

Содержание MICRO X



































































































































































































Результаты поиска

Содержание MICRO X

Отзывы:

Похожие инструкции для MICRO X

Бренды по названию

Популярные бренды

Korg MICRO X, Руководство по параметрам

Результаты поиска

Содержание MICRO X

Отзывы:

Похожие инструкции для MICRO X

Бренды по названию

Популярные бренды