Korg Digital Mixer ZERO4, Руководство по обслуживанию

Страница: 23 / 35

・Confirmation of MIC INPUT (MIC GAIN HIGH/LOW)
*This check uses D3200,
instead of a microphone
Connect the ZERO4 and the D3200 like following.
If you have a microphone, please use it.
ZERO4 MIC(TRS) terminal - D3200 MASTER L
Set the MASTER FADER of D3200 to "40".
Set the CH1,2,3,4 INPUT SELECTORs to "MIC".
Confirm that the MIC GAIN switch of the ZERO4 (under right of MIC IN) is "HIGH".
Set the CH1,2,3,4 GAIN to the center.
Press the PLAY switch of D3200. (Demo song starts.)
Set the CH1 module FADER to "10".
You can hear the demo song of the D3200 through the headphones,
confirm that there is not noise and fragmentary sound.
Press the MIC GAIN (under right of MIC IN) and set it to "LOW".
Confirm that the sound of the headphones becomes smaller.
Set the CH1 module FADER to "0".
Press the MIC GAIN (under right of MIC IN) and set it to "HIGH".
Set the CH2 module FADER to "10".
Confirm that there is not noise and fragmentary sound from the headphones.
Press the MIC GAIN (under right of MIC IN) and set it to "LOW".
Confirm that the sound of the headphones becomes smaller.
Set the CH2 module FADER to "0".
Press the MIC GAIN (under right of MIC IN) and set it to "HIGH".
Set the CH3 module FADER to "10".
Confirm that there is not noise and fragmentary sound from the headphones.
Press the MIC GAIN (under right of MIC IN) and set it to "LOW".
Confirm that the volume of the headphones becomes smaller.
Set the CH3 module FADER to "0".
Press the MIC GAIN (under right of MIC IN) and set it to "HIGH".
Set the CH4 module FADER to "10".
Confirm that there is not noise and fragmentary sound from the headphones.
Press the MIC GAIN (under right of MIC IN) and set it to "LOW".
Confirm that the volume of the headphones becomes smaller.
Set the CH4 module FADER to "0".
Press the MIC GAIN (under right of MIC IN) and set it to "HIGH".
Press the STOP switch of the D3200. Then the demo song stops.
Pressing the STOP of the D3200, press the REW. (the song returns to the top.)
Pull out the cables which are connected.
KORG INC.
ZERO4 (X-5800) Check before Shipping
Revised
No.
Date 9／10 2007/4/23
QCI-5800 Page