Korg Digital Mixer ZERO4, Руководство по обслуживанию

Страница: 19 / 35

Normal Mode Check
Preparation
*For example,
Turn the power on of D3200. Select the DemoSong"I'd Be A Fool".
this explanation uses the D3200.
Pressing the SONG switch of the D3200, and press the "+ "or" -" for several times,
Any sound source is Ok which
when "I'd Be A Fool" is displayed then release your fingers from the switches.
can be connected to the ZERO4.
Set the MASTER FADER of the D3200 to "0".
Connect the ZERO4 and the D3200 like following.
ZERO4 CH1 LINE L/MONO ― D3200 MASTER OUT L
ZERO4 CH1 LINE R ― D3200 MASTER OUT R
Check
・Confirm that the setting of ZERO4 is factory setting.
・Turn the power on of the ZERO4.
Confirm that the display is "120.0".
Confirm that the TAP LED under the "120.0" is blinking.
Set the ZERO4 like following.
BOOTH VOL, MASTER VOL->MAX (right end)
CH1,2,3,4 MODULE FADER->MAX (top)
MONITOR BAL , LEVEL (right bottom side)->MAX (right end)
CH1,2,3,4 INPUT SELECTOR->LINE
MONITOR
・Confirmation of LINE(TRS) INPUT.
Press the PLAY switch of D3200. (Demosong starts.)
Connect the headphones to the standard jack of ZERO4 MONITOR. (front left side)
You can hear the demo song of the D3200, confirm that there is not noise
and fragmentary sound.
Set the LEVEL (right bottom side) to MIN (left end).
Confirm that the sound disappeared.
Take out the headphone plug from the standard jack and connect to the mini jack.
Set the LEVEL (right bottom side) to MAX (right end).
You can hear the demo song of the D3200, confirm that there is not noise
and fragmentary sound.
Set the LEVEL (right bottom side) to MIN (left end).
Confirm that the sound disappeared.
Set the LEVEL (right bottom side) to MAX (right end).
Take out the headphone plug from the mini jack and connect to the standard jack.
*Before CH4 the demo song
Take out the cable which is connected to the CH1 LINE L/MONO of ZERO4, of the D3200 finished,
then connect it to the CH2 LINE RL/MONO Pressing the STOP of D3200
Press the REW switch.
Take out the cable which is connected to the CH1 LINE R of ZERO4, The song returns to the top.
then connect it to the CH2 LINE R.
Then press the PLAY.
You can hear the demo song of the D3200 from CH2, confirm that there is not noise
and fragmentary sound.
Same as above confirm the sound (D3200 demo song) from the headphones
regarding CH3,CH4.
After confirmation of the CH4,
Press the STOP switch of the D3200. Then the demo song stops.
Pressing the STOP of the D3200, press the REW. (the song returns to the top.)
Pull out the cables which are connected.
KORG INC.
ZERO4 (X-5800) Check before Shipping
Revised
No.
Date 5／10 2007/4/23
QCI-5800 Page