7
2-4. Wiring System Power Inputs
The JetCon 2302 supports DC 10~60V wide range redundant power input
and also supports negative power system for telecom applications. The
following diagrams show the wiring architectures of positive and negative
power systems.
1. Insert the power wires into the V+ and V- contacts of the terminal block
connector respectively.
2. Tighten the wire-clamp screws to prevent the DC wires from being loosened.
3. Power 1 and Power 2 support power redundancy and polarity reverse
protection functions.
4. The device accepts positive or negative power system input, however Power
1 and Power 2 must be applied with same mode.
Note:
Please ensure all wirings and connectors are well connected with
the device before powering on the systems.