Korea Nakajo NID-1520T3, Инструкция по эксплуатации

Страница: 5 / 24

1-2. How to install the product and the ground connection
Warning The rated voltage of this product is AC 220V
- When using the product, insert the power plug into AC 220V (
±
10% 198~242V) electrical
outlet.
- Use an electrical outlet with 15A.
- In order to prevent electric shock, and product damage, install proper ground wire as
specified in the electric safety rule.
Power connection
l
Insert the power plug into
AC100V50/60Hz electrical outlet only.
l
Be sure to use a properly grounded
electrical outlet only.
l
Use an electrical outlet with electric
capacity of15A.
l
Never connect multiple power plugs to
one electrical outlet or a extension cord.
Supply water connection
l
Install the on/off valve and connection
adaptor nipple on the water pipe, then
install
G1/2 holeto
feed-water inlet,
located at lower back side of the product.
l
Be sure to install to drinking water only.
ex) waterworks. It may cause the product
breakdown by using underground water.
l
Do not use old supply water hoses and
corroded pipes. corroded pipes.
Supply water pressure
：
Use booster pump when it is
lower than 98k
㎰
(1
㎏
/
㎠
)
～
389 k
㎰
(4
㎏
/
㎠
),
use reducing valve when
it is higher than above range.
Ground connection
l Connect the ground wire(green/yellow
wire) to the ground contact part on the
lower back side of the product using a
proper ground connection method
specified in the electric safety rule.
l
Water pipe or gas pipe is very danger-
ous and must not be connected forg-
rounding purposes.
Drain hoses
l
When installing the drain hose, make
sure it is neither bent, smashed, nor
clogged at the tip.
l
When the drain hose is folded, it may
cause clogging and reverse flow water
goes into the drain.
Drain hose
5