Korea Nakajo NID-1520T3, Инструкция по эксплуатации

Страница: 14 / 24

3-1. How to wash and clean the product
Warning
Caution
l
Before performing the cleaning operation, be sure to unplug the power plug from the electrical outlet.
- It may cause fire and electric shock.
l
When washing, do not sprinkle water directly onto the product.
- It may cause fire and electric shock by short-circuit.
l
Be sure to clean the product regularly, and maintain a good sanitary condition.
- Do not fail to clean regularly, otherwise it may cause adverse effect on health by water scale, mold and various
bacteria. Especially, be sure to maintain a good sanitary condition to prevent water scale, contaminated various
bacteria from getting into the cup with water.
l
Wash your hands before cleaning, and use clean cotton cloth for cleaning.
l
Never use abrasive powder, powder detergent, oil hot water (40
℃
or above), rough wire brush, acids,
thinner, benzene, alkaline detergent, etc. Otherwise, the plastic surface may be damaged.
l
Before using cleaning agent or sterilizing agent, refer to the precaution on the container label of such product.
l
Residual cleaning agent or sterilizing agent may cause adverse effect on health or rusty surface. Completely
remove any residuals of such products.
l
Be sure to wash the product every day.
l
It is very dangerous to wash inner part of the product. Do not wash the inner part except the specialists.
Things to be prepared
1 2 3
4 5
u
Container designed to receive ice.
u
Cleaning liquid: Dilute any commercially available neutral detergent with water at the ratio of 1:500
(add 1ℓ of water to about 2.0
㎖
of cleaning liquid)
u
Sterilizing agent: Rubbing alcohol in spray container (concentration 50~80%)
u
Sterilizing agent: sodium hypochlorite solution (concentration of 6%) diluted with water at the ratio of 1:300
(water:1ℓ; solution about 3.3
㎖
)
u
Brush: Brush with stiff hair is preferred
u
Water at the room temperature or warm water with temperature of 40
℃
or below.
u
Clean cotton cloth
①
Open the front panel
②
Take out the drip tray (cup tray).
③
Disassemble the drip tray and wash.
④
Disassemble the drip tray with the
(+) the screw driver wash thoroughly.
(Be careful not to loose the hose. )
⑤
Wash assembled part of
outlet and drip tray
with clean cotton cloth.
14
(Be careful not to loose the hose. )
※
Cleaning has to be done once a month.