koppel ERA series, Руководство пользователя, Страница: 8 / 21

6
Selecting FEEL mode
Setting temperature
Turning on
Press button. When the appliance receives the
signal,
the RUN indicator of the indoor unit lights up.
Operation Instructions
With the remote controller pointing toward the air conditioner.
When the unit is not at FEEL mode.
There will be a delay when mode
is changed during the operation,as air
might not get blown out.
NOTE NOTE
If you don't like the content of FEEL mode operation,
shift to DRY,COOL or FAN mode.
Air temperature adjustment is possible even during FEEL operation.
There are 4 levels of adjustment possible with the button or
the button.
Press the MODE select button repeatedly until the mode indicator
on the display points at FEEL mode.
1
2
FEEL mode automatically selects the operation mode(DRY,FAN,COOL) depending on
the current room temperature .
Press the button or the button.
When the button is pushed,the temperature will increase 1
.
When the button is pushed,the temperature will reduce 1 .
After temperature will increase 2 ,the indicator will not change.
After temperature reduce 2 ,the indicator will not change.
Indoor temperature Target temperature
Less than 20
23
23
Over 26
20 ~ 26
Operation mode
DRY
COOL
Operation mode and temperature are determined by indoor temperature
18
FEEL mode operation procedure
ON/OFF
2
3
SLEEP
FAN
TIMER SWING
ON/OFF MODE
MID
SWING
AUTO
DRY
FAN
HEAT
COOL
FEEL
SLEEP TIMER ON
HIGH
LOW
TMIER OFF
1
2
3
Fan