koppel ERA series Скачать руководство пользователя страница 10

8

It is necessary to clean the air filter after using 
it for about 100 hours.
Clean it as follows:

Front panel maintenance

Air filter maintenance

Turn off circuit breaker

Never use volatile substance 
such as gasoline or 
polishing powder to clean 
the appliance.

Clean and re-install 
the air filter.

Close the front panel again.

shock!

Electric 

Dangerous!

Wipe with a soft and 
dry cloth.

Use lukewarm water(below 
40

) to clean if  the 

appliance is very dirty.

Never sprinkle water 
onto the indoor unit

Reinstall and shut the 
front panel.

Reinstall and shut the front 
panel by pressing position "b" downward.

If the dirt is conspicuous,
wash it with a solution of
detergent in lukewarm water.
After cleaning, dry well in 
shade.

 Clean the air filter every two weeks 
 if the air conditioner operates in an
 extremely dusty environment.

Stop the appliance 
and remove the 
air filter.

1.Open the front panel.
2.Press the handle of the filter gently
   from the front.
3. Grasp the handle and slide out the filter.

soft cloth to 
    clean it.

Use a dry and 

Grasp position "a" 
and pull outward to 
remove the  front panel.

a

a

b

b

Maintenance

Содержание ERA series






















Отзывы: