(1) Fix the switch slot turning it to the left.
(2) Place the hole on the lower part of the switch housing on top of the inside rod.
(3) Turn the switch slot, place the screw and tighten it counter-clockwise to secure it.
INSTALL THE BASE CORRECTLY IN ORDER TO GIVE THE APPLIANCE THE RIGHT
STABILITY
WARNING
INSERT THE PLASTIC CAP INSIDE THE
METAL PROFILE APPLYING A LIGHT
LATERAL PRESSURE ON THE METAL
PROFILE.
MAKE SURE THE LITTLE WINGS OF THE ME-
TAL PROFILE SLIDE INSIDE THE SPECIAL
GROOVE ON THE PLASTIC CAP UNTIL IT
LOCKS COMPLETELY.
WHEN ASSEMBLY IS DONE, THE CAP AND THE PROFILE MUST BE PERFECTLY
ALIGNED WITH EACH OTHER.