BLADE ASSEMBLY
PRECAUTIONS
OPERATING INSTRUCTIONS:
1.
Motor components
2.
Rear grid
3.
Grid blocking nut
4.
Blade
5.
Nut lock
6.
Front grid
7.
Screw
1.Install the rear grid on the motor and secure it using the nut.
2.Place the blade on the drive shaft and secure it with the nut lock.
3.Mount the front grind with one of the 2 following methods according to
the model of the fan in your possession:
(1)Install the grid placing the hook on top of the rear grid. Join the two
grids pressing the sides together and place them inside the outsi-
de plastic ring. Block the ring with the clips and secure it using the
screws.
(2) Mount the front and rear grids making sure that the clips can be
closed to block the safety grids of the fan.
Do not operate the fan, if the blade is damaged or cracked.
1.
Speed control: you can adjust the speed of the fan using a button or a knob of the
switch. Use the button or the knob according to the following instructions:
(1) Using the knob: slide the knob to one of the three speed positions (1-
2-3) in order to switch on the fan. Set the knob to “O” position in order to
switch off the fan.
(2) Using the buttons: simply press one of the three buttons indicating
the speed level (1-2-3) in order to switch on the appliance. Press the “O”
button to switch off the fan.
2.
Oscillation: press the knob in order to activate it. Block the knob in order to stop
the fan.
3.
Tilt function: switch off the appliance before adjusting the inclination. You can direct
the airflow upwards or downwards simply moving the safety grid of the fan.
4.
Adjusting the height: Loosen the height knob, adjust the fan at desired position
then tighten the knob again.
