13
• FULLY UNWIND THE POWER CORD BEFORE OPE-
RATING THE APPLIANCE.
• NEVER LET THE POWER CORD RUN THROUGH
SHARP EDGES; AVOID CRUSHING IT.
• DO NOT LEAVE THE APPLIANCE EXPOSED TO
ATMOSPHERIC AGENTS (RAIN, FROST, SUN, ETC.).
• NEVER USE THE APPLIANCE:
- WITH WET OR MOIST HANDS;
- IF IT HAS FALLEN AND HAS OBVIOUS RUPTURES
OR MALFUNCTIONS;
- IF THE PLUG OR POWER CORD DEFECTIVE;
- IN HUMID OR GAS SATURATED ENVIRONMENTS.
• DO NOT COVER THE APPLIANCE WITH TOWELS,
CLOTHING, ETC.
• PLACE THE APPLIANCE ONLY ON HORIZONTAL
AND STABLE SURFACES, AWAY FROM SHOWERS,
BATHTUB, SINKS, ETC.
• IF THE APPLIANCE IS WET OF GETS IN CON-
TACT WITH WATER, DO NOT USE IT AND HAVE IT
CHECKED BY A SPECIALISED LABORATORY.
• ALWAYS REMOVE THE MAINS PLUG FROM THE
POWER SUPPLY IMMEDIATELY AFTER USE AND
BEFORE PERFORMING ANY CLEANING OR MAIN-
TENANCE WORK.
• REPAIRS SHOULD ONLY BE CARRIED OUT BY A
QUALIFIED TECHNICIAN.
• REPAIRING THE APPLIANCE BY YOURSELF CAN
BE EXTREMELY DANGEROUS.
• AN APPLIANCE THAT IS NOT WORKING ANYMO17
RE, MUST BE RENDERED UNUSABLE, BY CUTTING
THE POWER CORD BEFORE THROWING IT.
• CLEAN THE APPLIANCE USING A DAMP CLOTH.
DO NOT USE SOLVENTS OR ABRASIVE DETER-
GENTS.
