Kooltronic Intrepid Series, Руководство оператора

Страница: 7 / 17

Principles of Operation (con’t)
RESETTING
If it becomes necessary to reset the unit, the factory settings are as follows:
7
PARAMETER DESCRIPTION VALUE UNIT
RANGE
MINIMUM MAXIMUM
SEt
Set Point 75 °F 60 95
Hy
Differential 10 °F 1 45
dP4
Fourth probe display 0 -- -- --
dP3
Third probe display 0 -- -- --
dP2
Evaporator probe display 0 -- -- --
dP1
Room probe display 0 -- -- --
AFH
Differential for temperature alarm recovery 2 °F 1 45
ALL
Minimum temperature alarm 35 °F -67 120
ALU
Maximum temperature alarm 120 °F 35 302
SHy
Differential for auxiliary relay 5 °F 1 45
SAA
Set point for auxiliary relay 115 °F -67 302
ACH
Kind of action for auxiliary relay CL -- -- --
AC
Anti-short cycle delay 2 min 0 50
odS
Outputs delay at start up 0 min 0 255
P2P
Evaporator probe presence n -- -- --
ot
Thermostat probe calibration 0 °F -21 21
US
Maximum set point 95 °F 75 302
LS
Minimum set point 60 °F -67 75
Ptb
Map code 7 -- 0 65535
rEL
Software release 0 -- -- --
rSE
Real set point 0 -- -- --
onF
on/off key enabling ES -- -- --
PbC
Kind of probe ntc -- -- --
Adr
Serial address 1 -- 1 247
HES
Differential for energy saving 0 °F -54 54
rrd
Regulation restart with door open alarm y -- -- --
odc
Compress status when open door no -- -- --
nPS
Number of activation of pressure switch 15 -- 0 15
did
Digital input alarm delay 5 min 0 255
i1F
Digital input configuration EAL -- -- --
i1P
Digital input polarity cL -- -- --
dAO
Delay of temperature alarm at startup 00:00 h -- --
ALd
Temperature alarm delay 0 min 0 255
ALc
Temperature alarms configuration Ab -- -- --
ArP
Probe selection for auxiliary alarm P1 -- -- --
dLy
Display temperature alarm 00:00 min. 0 20
Lod
Probe displayed P1 -- -- --
rES
Resolution in -- -- --
CF
Temperature measurement unit F -- -- --
CH
Kind of action: heating cooling cL -- -- --
COF
Compressor OFF time with faulty probe 4 min 0 255
COn
Compressor ON time with faulty probe 20 min 0 255
O4
Fourth probe calibration 0 °F -21 21
P4P
Fourth probe presence n -- -- --
O3
Third probe calibration 0 °F -21 21
P3P
Third probe presence n -- -- --
OE
Evaporator probe calibration 0 °F -21 21