VII. Specific Model Data
Mounting
Kooltronic Air Conditioners have been engineered to be easily installed. To avoid damaging your air
conditioner, please read the following information before installation:
1. Attach two hooks to your enclosure with supplied hardware (see mounting drawing).
2. Route the power cord through the bottom cutout in your enclosure. It is recommend that a lift truck be
used to mount the air conditioner. Hang the air conditioner on the hooks. Before the lift truck lowers the
air conditioner make sure that the hooks are located inside of the small cutouts on the front panel.
3. Tighten the air conditioner bottom flange to your enclosure with supplied hardware (see mounting
drawing).
4. If the mounting panel of your enclosure is not stiff enough (moment inertia is less than 0.005"
4
) it is
recommended that the three additional supplied screws be used at approximately the middle of the unit
height for proper gasket compression. The screws must be started from inside your enclosure.
5. Attach the supplied drain hose to the drain tubing on the bottom of the air conditioner using the plastic
clamp.
CAUTION
7
If the air conditioner is mounted to the cabinet door you must be sure that the door
hinges will support the additional weight of the air conditioner. Also be certain that
when the door is opened fully, the cabinet does not become unbalanced. The actual
weight of the unit can be found in the Technical Data on page 9.
Dimensions, inches [metric], are for reference only and are subject to change.
CONDENSER AIR INLET
(Ambient Air In, 3 Sides)
CONDENSER OUTLET
(Warm Ambient Air Out)
WARM AIR RETURN
FROM ENCLOSURE
COOL AIR OUTLET
TO ENCLOSURE
EP56B
EP56T
24.11
[612.4]
24.45
[621.0]
4
3
THERMOSTAT
ADJUSTMENT
ACCESS
POWER
CORD
DRAIN
4
3
2
1
EP56B
EP56T
4
3
2
1
1
1
EP56T = Top Evaporator Air Discharge
EP56B = Bottom Evaporator Air Discharge
56.54
[1436.1]
3.05
[77.4]
17.18
[436.4]
(6) .375 [9.5]
DIA. HOLES
0.62
[15.9]
TYP.
0.50
[12.7]
TYP.
10.29
[261.3]
6.44
[163.7]
11.38
[289.1]
7.37
[187.2]
17.75
[450.8]
18.57
[471.7]
53.75
[1365.3]
4.56
[115.8]
1.78
[45.3]
33.21
[843.6]
0.80
[20.3]
0.95
[24.1]
7.46
[189.4]
TYP.
20.25
[514.3]
1.45
[36.7]
10.41
[264.5]
EP56B
EP56T
3
4
EP56T
EP56B
3
4
(3) .375 [9.5]
DIA.OPTIONAL
MOUNTING
HOLES
(4) .375 [9.5]
DIA. HOLES
EP56T = To
EP56B = B
MOUNTING PLAN
EP56 SERIES