VII. Specific Model Data
Mounting
Kooltronic Air Conditioners have been engineered to be installed easily. To avoid damaging your Air
Conditioner, please read the following information before installation
.
•
Top-Mounted Air Conditioners for external top installation contain weld-nuts.
•
Refer to Figure 1 above for the location of all mounting holes and cutouts.
•
Make sure the cutouts don't interfere with components inside your cabinet
.
•
Proper alignment of all air inlets and outlets is essential for optimum performance of the Air
Conditioner.
•
All externally-mounted Air Conditioners must be fully gasketed to ensure proper sealing. This seal is
necessary to maintain the integrity of the closed loop system. See Gasket Placement, Figure 2, above.
•
Use all existing mounting holes to insure stability and a tight seal.
•
High strength mounting screws are recommended.
•
The external drain hose must not be elevated above the exit port. Improper mounting will impede the
flow of condensate and may cause internal malfunctions.
CAUTION
7
When unmounting the unit from the cabinet, make certain
to keep the unit level to avoid spilling any water
that may be in the condensate pan.
Dimensions, inches [metric], are for reference only and are subject to change.
Dimensions, inches [metric], are for reference only and are subject to change.
FIGURE 1
FIGURE 2
MOUNTING PLAN
GASKET PLACEMENT
13.38
[340.0]
1.90
[48.2]
9.00
[228.6]
TYP.
12.00
[304.8]
3.70
[94.0]
2.59
[54.8]
6.00
[152.4]
6.00
[152.4]
14.12
[358.6]
2.50
[63.5]
2.83
[72.0]
(6) .312 [7.9]
DIA. HOLES
2.06
[52.3]
1.19
[30.2]
TYP.
(6) MOUNTING HOLES
.50
[12.7]
.50
[12.7]
.50
[12.7]
.50
[12.7]
4.19
[106.4]
GASKET 1/4" x 1/2"
KOOLTRO
N
IC P/
N
0639-55
START A
N
D E
N
D GASKET
MATERIAL HERE.
USE O
N
E CO
N
TI
N
UOUS
PIECE OF GASKET.
BE
N
D GASKET AROU
N
D
THE COR
N
ERS, DO
N
OT
STRETCH THE MATERIAL.
APPLY (3) SEPARATE
PIECES OF GASKET
BET
W
EE
N
THE
PERIMETER GASKET
AS SHO
WN
.
