Kontron PCI-953 Скачать руководство пользователя

Страница: 156 / 158

5-8

PCI-953 Single Board Computer User’s Guide

Display Setup

By default, any Windows OS starts with a 640 x 480 by 16 color display setting.

1) Load the display driver provided on the Single Board Computer Technical Reference CD

to maximize the VGA performance.

2) If you are using a monitor that Windows cannot identify, in the “Display Setup” menu

select an appropriate monitor manually.

3) For Windows-NT 4.0 users, as PCI-953 provides Direct AGP on-board, Service Pack 3.0 or

above is required to activate this display feature.

Network setup

Windows 95/98/ME users:

1) If you will be using an off-board ISA/PCI network card, install the card in an available

slot.

2) Start Windows 95/98/ME and let Windows 95/98/ME automatically detect your network

adapter.

3) Provide the driver and complete the installation.

4) Restart Windows.

5) Once Windows is loaded, go to Control Panel -> System -> Device Manager and see if

your network adapter has been installed properly. A warning sign will be prompted if
the network adaptor is not properly installed.

6) Remove any network device from System Setup menu that is not properly installed.

Then restart Windows to re-detect your network adapter again.

7) Once hardware installation is complete, go to Control Panel -> Network to set up your

networking configuration. This includes DNS, IP, and Gateway. Appropriate protocols
are required to carry your networking activities. Please refer to your system
administrator for additional assistance.

Содержание PCI-953































































































































































Результаты поиска

Содержание PCI-953

Отзывы:

Похожие инструкции для PCI-953

Бренды по названию

Популярные бренды

Kontron PCI-953, Руководство пользователя

Результаты поиска

Содержание PCI-953

Отзывы:

Похожие инструкции для PCI-953

Бренды по названию

Популярные бренды