manualshive.com logo in svg

Kontron PCI-953, Руководство пользователя

Поделиться
Скачать
Kontron PCI-953 Скачать руководство пользователя страница 112

4-40        

PCI-953 Single Board Computer User’s Guide

³

Legacy USB Support

Legacy USB Support refers to the USB mouse and USB keyboard support. Normally if this option 
is not enabled, any attached USB mouse or USB keyboard will not become available until a USB 
compatible operating system is fully booted with all USB drivers loaded. When this option is 
enabled, any attached USB mouse or USB keyboard can control the system even when there is no 
USB drivers loaded on the system. Set this value to enable or disable the Legacy USB Support. 
The Optimal and Fail-Safe default setting is Disabled.

³

USB 2.0 Controller

Set this value to enable or disable the USB 2.0 controller. The optimal default setting is Enabled. 
The fail-safe default setting is Disabled.

³

USB 2.0 Controller Mode

Set this value to configure the USB 2.0 controller to operate in High Speed mode (480Mbps) or 
Full Speed Mode (12Mbps). The optimal default setting is Enabled. The fail-safe default setting is 
Disabled.

Disabled*

Set this value to prevent the use of any USB device in DOS or during 
system boot. This is the default setting.

Enabled

Set this value to allow the use of USB devices during boot and while 
using DOS.

Auto

This option auto detects USB Keyboards or Mice and if found, allows 
them to be utilized during boot and while using DOS.

Disabled

Set this value to disable the USB 2.0 controller. This is the fail-safe 
default setting.

Enabled

Set this value to enable the USB 2.0 controller. This is the optimal 
default setting.

High Speed

Set this value to configure the USB 2.0 controller to operate in High 
Speed mode (480Mbps). This is the optimal default setting.

Full Speed 

Set this value to configure the USB 2.0 controller to operate in Full 
Speed mode (12Mbps). This is the fail-safe default setting.

Содержание PCI-953































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды