Kontron PCI-953, Руководство пользователя

Страница: 147 / 158

Exit Menu 4-75 PCI-953 Single Board Computer User’s Guide
BIOS Setup
Make your selection using the arrow keys and press Enter. If you attempt to exit without saving,
the program asks if you want to save before exiting.
During boot up, PhoenixBIOS attempts to load the values saved in CMOS. If those values cause
the system boot to fail, reboot and press [F2] to enter Setup. In Setup, you can get the Default
Values (as described below) or try to change the selections that caused the boot to fail.
³
Discard Changes and Exit
Use this option to exit Setup without storing in CMOS any new selections you may have made. The
selections previously in effect remain in effect.
³
Discard Changes
If you change your mind about changes you have made during a Setup Session and have not yet
saved the values to CMOS, you can restore the values you previously saved to CMOS.
Selecting “Discard Changes” on the Exit menu updates all the selections and prompts with this
message:
Load previous configuration now?
[Yes] [No]
Make your selection using the arrow keys and press Enter .
³
Load Setup Defaults
To display the default values for all the Setup menus, select "Load Setup Defaults" from the Main
Menu. The program prompts with this message:
Load Default configuration now?
[Yes] [No]
Make your selection using the arrow keys and press Enter . If the BIOS program detects a problem
in the integrity of values stored in CMOS during boot up, it displays these messages:
System CMOS checksum bad - run SETUP
Press <F1> to resume, <F2> to Setup